Search results

It needs to used with an app. Which app it is a mystery as the product specs don't say. It may (or may not) work with universal wifi camera apps.

What phone do you use? 4G is cellular and is nothing to do with WiFi. '5G' on the drone above refers to 5ghz WiFi. It needs a 5ghz wifi compatible chip in your phone Many phones these days can do both 2.4ghz and 5ghz wifi.

The 2.4ghz camera's modules are not good quality. It's not really worth investing in. Analog fpv is the way to go because the range is further and the latency is ultra low. You still have the option to fit any HD camera to the bottom. The EX2H can lift both. View the HD footage after the flight.

Not sure what you mean ? I don't think there was ever a 2.4ghz wifi camera for the Bugs 3/EX2H. They are all 5G wifi i believe .

C6000 is the wifi streaming option. c4000 has no wifi Scroll down and the red text says ''Note: Pls confirm whether your phone support 5G wifi if you choose C6000 camera version.'' Yes the free connector is probably for the camera. But it could be for a led light. If you plan to use it for...

The battery uses an XT30 connector it will loosen up over time. If its really tight, you could lighty sand it down abit to remove some material.

That camera has it's own internal battery. You don't need to plug it into the drone but it might be possible for controllng the camera remotely. The only thing you need to do is fit a mount. The C4000 camera doesn't have any wifi streaming capabilties. Only recording. There are not that many...

I think that kit would be a great introducion to brushless and fpv. I have flown the EX2 mini and it flies great. It can be mellow or pretty fast flyer in rate 2. Once you try low latency fpv with Acro you'll realise it's a whole different dimension of flying completely different to line of...

Have you done the calibration of the giro ? look in the manual for instructions. Next i would dismantle the drone and check the motors are secured. And check all the wiring connections. Also if you have lipo check tool. Check the lipo voltages are correct on each cell. It could be a faulty...

If you already own a number of brushed models idk what are you expecting from this one, but it will perform similar to the others. you are throwing money away if you keep buying more of them expecting something different. I've had a handful of toy models. They are slow. They are flimsy. a bad...

Yes a 5v regulator has fried. It's quite common on SPF3/Omnibus FC's If the fc is only powering via the usb socket, then the usb socket is the way to salvage it. Cut short a spare micro usb cable. Cut it about 10cm from the plug. Find the +/- wires on the cable, some times they are colour...

Correct! 2 blades is more efficient. 3 blades will draw more amperage.

Altitude hold as a feature has nothing to do with handling wind. What you really need is a higher voltage drone with bigger brushless motors. Fighting wind is all about the motors. Brushless are alot more powerful than brushed motors. Some cheap RTF options like Eachine EX2 mini or Eachine...

Worth reading this http://oscarliang.com/quadcopter-motor-propeller/ Frame - 1o inch props will not fit the XL8 frame. 8 inch size props max only. 8 inch props need 1400-1600kv motors. Flysky Radio and receiver. Do not buy the bundle with the FS-iA6 receiver. Get the bundle that includes...

I see. The MJX Bugs 5W is $159 CDN on ebay.ca. Check it out

$135 CDN is quite alot for a drone that has brushed motors. You should be looking at something with brushless motors for that kinda money. Brushless motors are much better. But there is a problem. you won't find many brushless quads with 2.4ghz wifi video. They all tend to use 5G wifi. I...

Don't get the micro F4. It's not suitable. The other Omnibus F4 in the links are cheap clones and their quality is patchy. Some problems have been reported with Omnibus and GPS modules. The higher numbered versions of the board means problems on the fc have been fixed. The v4,V5,V6 etc are the...

Yes it will. But those batteries and the stock Bugs 3 battery have an XT30 connector. The wires included with the SKYRC IMAX BAC charger only come with XT60 connector. So you will need an adapter to convert the Xt30 to Xt60...

No it doesn't exist. The IMAX B6 is the best thing to use. but you still need the power supply unit. On the power supply, remove the plug, then solder the +/- wires to alligator clips, then you can hook those up to the 12v motorcycle battery +/- terminals. If you want to charge multiple 4s...

No that charger is for 1S 3.7v Lipo's only. It's not possible to charge a 4S (14.2v) Lipo with a usb charger. The 4S 4500mah (or any size) is too large. a usb adapter only puts 5v max at 0.5 amps or 1 amp. It would take forever. Also you need a minimum of 14.2v for 14.2v battery to begin...