Search results

Guys Ian thinking of building a quad that can be controlled via Wi-Fi ....and I have no idea of the Wi-Fi modules required can any one suggest the required flight controller and receiver that could be controlled through Android devices plzzzz help me

Hello guys this forum is really cool I got answers for my many questions how ever I have one more left ...I have used a2212/10t 1400kv motor and 30 amp esc for my quad ...and each motors will take a maximum current of 20a at full throttle so it takes total current of 90 amps for all of my...

Thanks for the reply can you tell me what is the maximum current that A2212,1400kv motor would take at the full throttle

Guys can any one suggest what should be the configuration of battery to be used.. I am running 2212/10t 1400kv motor with 30amp esc and using kk board as flight controller earlier I had used 25 2200mah lipo but it failed to run my quad it would shift to fail safe mode at 25 % throttle I am bit...

Ya I figured out too my motors need 20a but my battery was supplying only 16a for each motor thanks any way

Did

What battery food you use

Ya you are right thx

Thx for the reply will 3s 3000mah run well ..I have used A2212/10t 1400kv motor plzzzz reply

Thanks for the reply should I switch to lower kv motor of about 1100kv or will 1400kv run fine without any voltage PROBLEM

Thanks What about 3000mah

Guys new to this hobby . I have built my quad 450 with 30a esc and 1400:/ motors can any one suggest the right battery to be used

Guys I am new to this hobby can any one guide me. To select the lipo battery. For my quad 450 I have used 1400kv motors with 30amp esc ..I have used kkb

Thanks for the reply bro iam using 30 amps ..by the way what is bec srry bro I am totally new to this hobby

Jackson .. I have the same problem too when I increase the throttle with out props motors spin correctly even at full throttle but when I increase the throttle with props.on motor kk board suddenly disarm at 25% throttle so plz help me

Thanks for the reply....I have built quad copter 450 ..with A2212,1400kv ,30amps esc and 2200mah 3s battery,with 8*4.5 prop size and kk 2.5 plzzzz help me ,

Bro did you find solution

Guys I am totally new to this hobby plzzzz help me when I increase.the throttle the quad will automatically diarms ...due to this problem the quad is not taking off I am using kk 2.5 plz help me I have checked every connection and calibration everything seems to be right plzzzz help me guys

Bro even I have the same problem if you find the solution to this problem plzzzz tell me tooo