Recent content by X1XnobleX1X

Almost finished my quad, Only issue now is the TX and RX for the video, I'm getting no signal at all. I have tried changing the Dip switches on both the TS353 and the Boscam RC305 to match the channels and still get no signal. (I know the black areas shown in the pictures is where the dip...

Was almost finished. Plugged the OSD in, with the two 5V points soldered. And poof, it smoked. Not sure why? Anyone know?

I'm stupid, I plugged the ESC cable the wrong way. Sorry!

Thank you for your advice, calibrated all ESCs and all of them worked, which is great! EDIT: I can get it to arm. But the motors are not spinning at all? HELP!

Running into a bit of trouble, and I'm worried! Connected the motors to ESC and connected it to the power distribution board. And plugged the signal wire into the Naze32. Tested the Naze32 - No smoke. - Plugged in the battery no smoke. Tried testing my motors, via the motor test in...

Running into a bit of trouble, and I'm worried! Connected the motors to ESC and connected it to the power distribution board. And plugged the signal wire into the Naze32. Tested the Naze32 - No smoke. - Plugged in the battery no smoke. Tried testing my motors, via the motor test in...

Hello! I'm looking into buying the Diatone White sheep as my first build. As I think the ZMR250 is a little too small, and the blackout 330 is a bit too expensive. Is this frame kit worth getting? Also, please look at my parts, over a month of two of research and trying to get the right...

Thank you for your reply. I understand how to plug the Minimum OSD into the Naze32, but I'm asking since both the Bluetooth module and OSD use the TX and RX ports on the NAZE32. What would I need to do for them to both work at the same time?

Hello Forums, I'm about to purchase my parts for my new quadcopter. One question though, is there any possible way of connecting both Bluetooth and MinimOSD at the same time? I have read a few other posts, which say it's possible through configuration of "SOFTSERIAL". But no simple guide on how...

Hello again, I'v been doing a lot of research on quadcopter, to make sure I know how to program Naze32 etc. I have decided instead of purchasing the FPV gear going for FRSky transmitter module and receiver, as well as GPS for a more failsafe approach. One last question I have is, is it...

If I get the FPV, the only two items I can remove is the camera and the transmitter module correct?

Hello Holtneil, Thank you for your reply. I have been researching all day for various things. Most of the parts are the same, but I'll list them again. Camera: http://www.banggood.com/Arkbird-13-Sony-960H-CCD-700TVL-FPV-Camera-For-Aerial-Photography-p-952071.html ESC...

Hello! I'm interesting in building a quadcopter, but I'm quite a noob, this being my first ever miniquad,. I have watched this 5 part series, on how to building a budget miniquad. The Youtuber lists the parts that are needed as follows: Camera...