Recent content by Renghor

Hello, I have a QAV-R with LUX FC and a DX6i transmitter/spektrum satellite receiver. On Cleanflight I calibrated my ESCs with a throttle max at 1850 (and min at 1030) because my DX6i seems to only give a signal from 1020 to 1900 in the receiver tab (with +125% expo). However eveybody seems to...

I was simply on Spektrum 1024 and not Spektrum 2048 in the Configuration tab... Problem solved :)

I did a search on how to calibrate the DX6i and I did it on the TX but I can't find anything about a stick calibration in Cleanflight but that would be very helpfull! Could you please explain how I can do that?

I just did it but it don't change anything. This TX is perfectly working with another receiver so I think the issue come from cleanflight but I don't know how to change these channels ranges. It's like if every channel is divided in two parts affected to other wrong half channels :eek:

Thanks in fact the channels can be reversed. I've found that when you change the mapping (TAER1234) in the CLI you can exchange the channel but it seems that I have to change "half-channels". As an exemple when I push my throttle stick for the first half it increases the throttle (from 1306 to...

Hi! I'm at the end of my QAV-R build with a LUX FC and a SRX spektrum satellite but I have a final issue before making this beast fly. In fact in cleanflight on the receiver tab all my channels are illogically reversed. As an example moving the roll stick to the left on my DX6i increase the...