Recent content by oilee

Im wondering if this might be a good one to get started with. The upgraded version with a RX-F8P 8CH Bi-directional 1km Receiver Compatible With Frsky X9D X12S X7 DJT comes to about $144

I would like to do a first fpv quad build using you tube as a guide. Im new to the hobby so i would need help on all parts of the build and setting everything up. I stumbled on this one on the site here, cant remember where but I was wandering if this one is still relevant. Is it too old. would...

thanks for the help. I shouldn't have tried to build this. I thought i could do it.

I have the pids adjusted per rotor riots recommendations for starting out. If you mean re loading firm ware into the fc, i tried that and no change. I will check the solder joints and use multimeter, I havent done yet. From what i understand so far kiss has a thing called kiss gui . this is...

Im new to the hobby. This is my first build. I built the mr steele alien per his you tube build. It has a kiss pdb, kiss fc and kiss 24 esc and 2345 kv motors and 5x4.3x3 props. I have it to the point where i can hover it. But it twitches. not to the point where i cant keep it hovering but it...

Yessssssssssssssssssssssssssssss. I got it.after many hours. It turned out I didn' have the arming Configured correctly. Im such a newb the small things can trip me up.

Ok so i have the Kiss-GUI-1.16.15-win-x64 down loaded and i can connect the fc to it and it says i have firmware version kiss fc 1.2 then a bunch of serial #s ( activated). I can move the quad around and see it move on the screen. Is this as far as i need to go with the fc. On the...

Awesome, thanks for the replys ok, so this is where i am . I was able to set up a model on my taranis x9d and bind it to the x4r . I believe i have it wired and set up correctly. A few days ago i had down loaded the kiss extension onto google chrome and was able to see that the kiss fc has...

thanks for the reply. I dont know how to proceed with this quad. Im over my head

I have been flying a little blade inductrix around the house for a couple of months and decided to build the Mr steele 5'' edition alien. I followed this youtube vid, *NEW* Mr Steele Alien 5" build w/ KISS PDB I have most of the items listed in his build. I was able to bind the radio to the...