Recent content by Herpderpwerp

Wow ok, now i'm definitely gonna buy those escs, One more thing, there is a lot of apm version i found on ebay (2.6 / 2.8 / 3.1 etc) What are the differences between the version?

Hahaha, yeah i found some motors auction at $2 range, but the shipping cost is way more than the price of the motor, some even cost $7 just for shipping cost. I think i'm gonna buy 8pcs, 6 for the hexa and 2 for spares, i found a seller from hongkong for $6.70 each and free shipping, maybe gonna...

Found some cheap motor on ebay, http://www.ebay.com/itm/XXD-A2212-13t-1000KV-Brushless-Motor-for-DJI-330-F450-F550-X525-MWC-Multicopter-/121281595705?hash=item1c3cf24939 I think they were suppo 2212 13t 1000kv clone, they were sold with different kind of brands but with the same price range...

Try to fly it from your hand, apply throttle, but dont let the quad go just yet. Be careful with the prop tho. Feel which way the quad want to go, and if you hold it in your hand, you can feel which motor is vibrating more than the others. I used this method when i try to tune the pid settings...

Maybe this will give you some insight heheheh

Yup, 300 kv means 300 rpm / volt, but on 6s battery it can rev fast enough to have the same rpm as a 600kv motors at 3s, but at lower amps. Lower amps means longger flight time, and with lowet kv motors you can use larger props. It wont be as agile as smaller frame, and i guess it won't do...

Lower kv is the way to go for longger flight time, 300kv range with 6s battery can run about 30 minutes

Maybe you could try this one http://www.hobbyking.com/hobbyking/store/__63642__Multistar_Elite_3508_268KV_High_Voltage_Endurance_Motor.html With the right batteries, it could fly for about 50-60 minutes It could use a 8s batteries and with that high voltage, you could use lower c rating...

Hahaha, no..no..no, that guy tech skill is beyond me :D But it had cross my mind at one point to use some other means of control, using a mini quad, with fpv and using sensors attached to a google to control the yaw/pitch/roll just using my head, like turn my head to change yaw, tlit to change...

Have you try to balance the prop? I had similar issues once, the problem is one of the prop is unbalanced, when i balance the prop, the wobbling goes away

I think he use a nintendo wii controller, a multiwii fcb is basicly a nintendo wii controller heheheheh

Yup, the one that really sold me out is that dynamic range. When the guy entered a tunnel, even there is a very bright light at the end of the tunnel, you can still see the details inside the tunnel, not every action cam can do that, it usually jast darken the whole shadow area to make the...

Just remember something, try looking for altek cubic. It is not an action cam,but the sensor is great, it doesnt have mounts like action cam, but the size is about the same as an action cam. The cons is that it doesn't have lcd, and all is controlled via an app over wifi just like the xiaomi yi.

Wow, i think this one is better, i saw the downloaded clips, no complain there, it looks great. The dynamic range is good, sometimes the sky is a bit over exposed but still at a reasonable range. And i think the low light performance is excelent. And it got 2 batteries. I choose this one over...

The thing is, i made a cut under the body tha the battery can sit perfectly so it wont shifted during flight, but i miscalculated the front being heavier because of the camera and gimbal. The current fcb (cc3d) still can compensate for it but i think in a long term it will stress out the front...