Recent content by Corsair

Thank Holtneil for the video. One more observation : Arming is happening when left rudder is given, But actually as per the kk2.1 manual, arming should happen for right rudder. I thought the rudder channel is reversed and tried to correct it using t6config and digital radio s.w. There i...

Good News. You were right, it was turbulence problem in that room. I was able to lift the vehicle to more than 15 mts. Not instantly but by slowing giving throttle to more than 50%. I dint crash it. Initially, that is around 10 to 15% throttle, it was moving here and there but after 40%...

OK I will take out and fly. Ground effect can be the reason. Thanks for the input . I'm flying in the normal mode. I have rolled my battery on foam and fixed it on the base plate. Did CG is balancing everytime before take off.

Drifting problem :

Thanks for your inputs. I will do ESC calibration individually and update you. I have one good news and one Bad news. First I will start with Good News. Good news- Earlier observation of Vehicle pitching forward when giving throttle alone is no more present. The workaround is that, I was...

Hey Holtneil, Thanks for your suggestions. Check this link for latest better quality pics of my vehicle : Top Left is M1- CW, Top right is M2 -CCW, Rear Right is M3-CW, Rear Left is M4- CCW. I check with sensor test- its showing all OK. I have calibrated with FC on level platform which...

@Joe Conti , Yes . Front Left motor: CW - 8x4.5 R Front Right motor: CCW - 8x4.5 L Rear Left motor: CCW - 8x4.5 L Rear Right motor: CW - 8x4.5 R

@Joe Conti Absolutely Correct

Hello all, I checked with all basic possible errors like Motor spinning, correct prop direction, wiring connection. Everything was perfectly OK. But the problem still existed. Then I re flashed the firmware and placed the FC board using studds(Before it was hosted inside the foam). Suprisingly...

Check out thia link : http://youtu.be/c1rauTc4p5s

hello, I have double checked all the motor spin, prop mounting and wiring . Everything is perfectly fine.. But still my vehicle spins, fails to take off. My observation is that, M2(front right ccw) is not lifting up, rest all 3 motor lifted up for 5 cms from ground. I dont have idea on why M2...

Hello, After arming, when giving throttle to the system, the quad spins on the ground. Unable to take off from the ground, instead its rotation in CCW direction. We verified all motor connection, Props direction and mounting, Throttle range calibration is OK., ESC calibrating perfectly in a...

Hello MM, Today I was trying to take off my quad ( with specs as mentioned in the 1st post above) with 8x4.5 Props. But the vehicle Flipped away. It was not at all taking off (never Hovered) but flipped off . What could be the potential reason for it ?

Hello, Fortunately , just now , I got Motor spec : 1000KV, 150 W. http://aeroworks.co.in/store/index.php?id_product=20&controller=product This is confirmed information. Can you guys pls comment on the combination...Also on the props to be used ? Thank you.

Hello, Thank you very much for your reply and concern. Really its encouraging to see you guys taking the effort to reply to all queries in the forum. Yes, you guys are right. Even we are afraid that ESC may die once we mount it. I dont know the exact rating of DYS motor with me. Its...