Search results

  1. davidhk129

    3D print ..... Yosernite Sam

    Printer : Ender 3 V3 KE Slicer : Creality Print 5.1 ( Cura 4.9 was used on a couple of prints because I don't know how to apply " Support Manual" option on the new slicer.) Material : 1.75mm PLA filament. 6 different colour of filaments used. Printed model size : 91/2 in tall, 51/2 in wide. 100%...
  2. davidhk129

    Seeking instructions from people using Creality Print 5.1 slicer

    I have been trying the Creality Print 5.1 slicer on my Ender 3 V3 KE printer. So far, I am unable to use "Tree (manual)" option under Support. I can't find a way to "manually" apply Tree support on the area I select. Any input is appreciated. Thank you.
  3. davidhk129

    Golden Chalice

    Got my gold pla filament delivered today. The colour of silk gold brings out the elegance and glamour of the model.
  4. davidhk129

    I dare say it is a near-perfect print

    Chalice of Futility Pictures showing 4 sides of the printed model. There are no strings, no broken connections. Clean and exact. Printed model size : 100% of the stl file. 3.5 x 5.5 inches. Material : 1.75 PLA filament Printer: Ender 3 V3 KE Slicer : Creality Print 5.1 Nozzle temp : 220 C Bed...
  5. davidhk129

    Medieval Castle

    Pictures were taken on the printer as a reference to the size of the printed model. Printed model size : 50% of the actual stl file. # of parts to print : 22 Printer : Creality Ender 3 V3 KE Slicer : Cura 4.9 and Creality Print 5.1
  6. davidhk129

    After 5 yrs of manual bed leveling.....

    Something suprises me, to say the least...... After I plug in the usb/sd card into the printer and the printer starts printing, I can remove the sd card and the printer will continue printing. I found out it is because the printer "copies" down the gcode first before it starts printing. It does...
  7. davidhk129

    new member

    In case you are not certain what did I mean "propeller guards" .............
  8. davidhk129

    Vase

    Printer : Creality Ender 3 V3 KE Slicer : Cura 4.9 Material : Pla 1.75mm filament. Colour : White and green. Part 1 .... bottom Part 2 : Top Completed print : Front view Completed print : back view
  9. davidhk129

    new member

    RE : im interested in the holy stone HS600 any thoughts If you never fly a drone before, my answer is ....... No, not a good choice. Reason: That drone has 4 powerful brushless motors and NO propeller guards. An impact with a tree, wall or anything, you may break the propellers, or the...
  10. davidhk129

    Beast ZLRC SG906 Battery Needed

    Does the screenshot below resemble the battery you are using? If yes, then that's the battery you are asking for. This listing from Amazon.ca appears to indicate that SG906 and SG906Pro will share the same battery, except that it is a 7.4v 2800mah version while the SG906 Pro comes with a 7.6v...
  11. davidhk129

    L600 PRO MAX - propellers guard - landing protections

    I don't have an answer for that. Personally I don't think so.
  12. davidhk129

    L600 PRO MAX - propellers guard - landing protections

    As far as I have found out, your L600 pro max does not come with prop guards nor landing gear. They don't make those for the drone. Link to Banggood for L600 pro max.
  13. davidhk129

    After 5 yrs of manual bed leveling.....

    Voronoi Deer completed. Apart from 1 or 2 strings at the bottom, print turns out very good. No connection broken. There was a glitch. During the first print, one of the legs got detached from the bed. Had to abort, added some magigoo to the bed for 2nd print. 2nd print completed successfully...
  14. davidhk129

    After 5 yrs of manual bed leveling.....

    For an untrained layman, I thought it would be impossible to make a voronoi print when the printer was zipping at 300mm/s. I couldn't be more wrong. It came out Perfect. No broken connection, none. Size : 70% of the stl file. Elapsed Time : 2h 22m I shall next try a voronoi deer. That should...
  15. davidhk129

    After 5 yrs of manual bed leveling.....

    Manual Z Offset adjust and bed leveling are pain in the butt with my Ender 3 basic stock model. Finally I decided to upgrade. I chose Creality Ender 3 V3 KE. Bed size : 220mm x 220mm x 240mm There is a installation video from my Amazon listing. It's child play. Almost everything is...
  16. davidhk129

    Force1 F100(Bugs 3 clone) Battery Upgrade Question

    Do you know if the new battery will fit INTO the Bugs' compartment?
  17. davidhk129

    Force1 F100(Bugs 3 clone) Battery Upgrade Question

    I have a MJX Bugs 3 with stock battery. My questions regarding using a 2s 2200mah 50 c battery are as follow....... Are the connectors compatible ? Will the power connector be able to plug into the Bugs 3? (I don't think so.) Will the charge connector fit into the Bugs 3 charger? (I have doubt...
  18. davidhk129

    Why gps drones do not do 360 degree flips?

    Thank you. GPS is great. Many wonderful features. Unfortunately I am obsessed with 360 degree flips. I don't buy a drone which does not have 360 degree flips. The only gps drone I have is Eachine E511S.
  19. davidhk129

    Why gps drones do not do 360 degree flips?

    My personal preferences of a drone are as follow...... 1. Being able to do 360 degree flips. ( No fun if a drone cannot flip.) 2. Being able to stay put in mid air steadily when I'm "hands off " from the controller. I can have a drone with both optical flow positioning that allows the drone to...
  20. davidhk129

    lost drone.zzl sg906 beast3+

    @Robert Kelly I am not a fan of Banggood. For over 10 years being a drone hobbyist, I bought from Banggood just once, and that was only because they were the only one who was selling it. When the retailer and I are separated by 6000 miles, my trust on their dependability is minimal. And I have...
Top