Will this work?

[oscar1]

Hi, will this quadcopter build work? I need some people to check it before I build it. It would mean a lot if anyone could check over them as I don't want to waste my money. All the parts are listed below except for the propellers and the frame. Btw it's a 250 quad. Links to all the parts:
Motors (x4) : http://www.banggood.com/DYS-BE1806-2300KV-Brushless-Motor-2-3S-for-Mini-Multicopters-p-933192.html

Battery (3s):
https://hobbyking.com/en_us/turnigy...Q4_c-kOSaGuls8IRCBXJTyJFHTAsBGBWX8aArLi8P8HAQ

Flight controller: http://www.banggood.com/DALRC-NAZE3...ght-Controller-for-Multicopter-p-1020774.html

ESC's (x4): http://www.gearbest.com/multi-rotor...AlS0f17a20HKuyzsRLVyZ6xnX_BxTiSTeQaAo2g8P8HAQ

PBD: https://www.unmannedtechshop.co.uk/...-Zi08Kq0sqfdNOBZDbjtfSMOZeUD5FGJv0aAjgk8P8HAQ

Reciever: http://www.bonanzamarket.co.uk/list..._Dk7poalTPTHm7ch9q-4aZl_rIRb6tTbxwaAlQM8P8HAQ

Transmitter: http://www.gearbest.com/rc-quadcopt...03b_pwn198GoAkRTOV6wn6iZxHb-5-H3vAaAhV58P8HAQ

 

[holtneil]

Hi mate welcome to the forum , its all good till the receiver and transmitter these will be the weak link , try and get some thing better that you can use on all the quads you build ( you will have more than one trust me) A good transmitter will make a big difference to the set of the quad and and how it flies , this would be better
http://www.gearbest.com/rc-quadcopter-parts/pp_202973.html?wid=21
this will be the best
http://www.gearbest.com/rc-quadcopter-parts/pp_203038.html?wid=21

 

[Jackson]

difference to the set of the quad and and how it flies , this would be better
http://www.gearbest.com/rc-quadcopter-parts/pp_202973.html?wid=21

Not a good choice Neil, no failsafes, spotty range and no 3 way switch.

This blows it away for less money.
http://www.gearbest.com/rc-car-parts/pp_210798.html?wid=21

@ oscar1
If the Taranis is over your budget, this 10ch FS is a superb value. it has two 3way switches, full failsafes and built in telemetry to show your pack voltage. It has been field tested to a 2.2k range.
http://www.gearbest.com/multi-rotor-parts/pp_596926.html?wid=21

 

[oscar1]

Hi mate welcome to the forum , its all good till the receiver and transmitter these will be the weak link , try and get some thing better that you can use on all the quads you build ( you will have more than one trust me) A good transmitter will make a big difference to the set of the quad and and how it flies , this would be better
http://www.gearbest.com/rc-quadcopter-parts/pp_202973.html?wid=21
this will be the best
http://www.gearbest.com/rc-quadcopter-parts/pp_203038.html?wid=21

Nice, I'll rethink the receiver and transmitter then! Just out of curiosity, what would happen if I did use the receiver and transmitter that I was going to use.

 

[oscar1]

Not a good choice Neil, no failsafes, spotty range and no 3 way switch.

This blows it away for less money.
http://www.gearbest.com/rc-car-parts/pp_210798.html?wid=21

@ oscar1
If the Taranis is over your budget, this 10ch FS is a superb value. it has two 3way switches, full failsafes and built in telemetry to show your pack voltage. It has been field tested to a 2.2k range.
http://www.gearbest.com/multi-rotor-parts/pp_596926.html?wid=21

Thanks for the suggestions, I'll be sure to get one of these.

 

[oscar1]

Thanks for the suggestions, I'll be sure to get one of these.

I'm building this quad copter for school, so I'm on a bit of a budget. Would this be okay?: http://www.hobbywow.com/en-flysky-f...AMOF096kLxA-hpfwZBK92vPynjBLNE87QphoCMgrw_wcB

 

[holtneil]

Your better off getting what Jackson linked to glad he chipped in I could not think of which flysky is best for money
If you go cheap on the transmitter you cant do any adjustments in the transmitter so all adjustments has to be done on the FCB which can be hard and confusing , also the cheap transmitters can have gimbals that are not good so the quad becomes unstable and hard to fly ( buy cheap buy twice ) true done it my self

 

[Gyro Doctor]

... (FS-I6) "This radio system uses a high gain and high quality multi directional antenna" ... roflmao ... never thought of a snub of wire that way myself ...
Still a good radio choice for the price though

 

[Jackson]

... (FS-I6) "This radio system uses a high gain and high quality multi directional antenna" ... roflmao ... never thought of a snub of wire that way myself ...

It actually has two antennas for the diversity transmitter, and neither are a 'snub'.

 

[Gyro Doctor]

... ... Cross polarized twin sleeved dipoles ?!! ... Dayaaam, I had no idea ! ... Thanks for the correction Jackson