redstarforever
Member
hey guys, new to the forum and completely new to flying. anyway, here's whats been frustrating and drivin me nuts for a whole damn week! ..
I got myself what i think falls in that 'toy' category of drones/quadcopters
its called; -- X33c Folding Drone
not sure if anyone is fam with this particular type,, its a fairly basic $50 range quadcopter which comes with a hd camera.
I un boxed it and slowly assembled everything while reading through the Manual provided. got it all together, charged the battery as well a put 4 new AA batteries in the controller/transmitter (2.4Ghz)
Ok so here is my problem. on the very first start up i turned the switch on the copter to 'on' and the 4 LED lights on the underside of it were on and flashing. switched it off a minute later, went and opened the Manual to read through transmitter instructions on how to install and checked out the functions for a little while. half hour later i was ready so i got back to my copter and opened the switch again to turn it on BUT this time the 4 LED lights never came on. strangely enuff they just wouldn't light up again!! the red light in the camera tho, works when i plug in the battery and switch on.
im yet to figure out what it is, why the lights suddenly don't work (but camera does) and how to fix it!
apologies for the lengthy post btw. just so pissed off im yett to get the thing crankin and off the ground already! ;""((
props for anyone who might be able to help. really would greatly appreciate it. cheers
I got myself what i think falls in that 'toy' category of drones/quadcopters
its called; -- X33c Folding Drone
not sure if anyone is fam with this particular type,, its a fairly basic $50 range quadcopter which comes with a hd camera.
I un boxed it and slowly assembled everything while reading through the Manual provided. got it all together, charged the battery as well a put 4 new AA batteries in the controller/transmitter (2.4Ghz)
Ok so here is my problem. on the very first start up i turned the switch on the copter to 'on' and the 4 LED lights on the underside of it were on and flashing. switched it off a minute later, went and opened the Manual to read through transmitter instructions on how to install and checked out the functions for a little while. half hour later i was ready so i got back to my copter and opened the switch again to turn it on BUT this time the 4 LED lights never came on. strangely enuff they just wouldn't light up again!! the red light in the camera tho, works when i plug in the battery and switch on.
im yet to figure out what it is, why the lights suddenly don't work (but camera does) and how to fix it!
apologies for the lengthy post btw. just so pissed off im yett to get the thing crankin and off the ground already! ;""((
props for anyone who might be able to help. really would greatly appreciate it. cheers