Power distribution board and what battery should i use???

A

Awsometurtle20

Member
Hello my name is keven so for christmas im getting a cheap 250 quad kit which brings a power distribution board which is one without a 5v regulator. I was wondering
what battery should i use ?
The kit is one of those zmr250 clone kits from ebay
 

Attachments

  • downloadfile-1.jpg
    downloadfile-1.jpg
    33.4 KB · Views: 2
  • downloadfile.jpg
    downloadfile.jpg
    41.2 KB · Views: 3
RENOV8R

RENOV8R

Well-Known Member
For a 250 size frame, I'd use a lipo anywhere in the 1300 mah to 1800 mah range, in the 75 to 90 C range. 1300 mah will give you a fast, responsive quad with a short flight time, 1800 mah will be more sluggish due to the extra weight (but also more stable hint hint) with increased flight time. My favorite is the R-Line 1300 mah 90C lipo
 
A

Awsometurtle20

Member
RENOV8R said:
For a 250 size frame, I'd use a lipo anywhere in the 1300 mah to 1800 mah range, in the 75 to 90 C range. 1300 mah will give you a fast, responsive quad with a short flight time, 1800 mah will be more sluggish due to the extra weight (but also more stable hint hint) with increased flight time. My favorite is the R-Line 1300 mah 90C lipo
Click to expand...
Well thanks man and should i use the pdb with the 5v regulator or the one without it
 
RENOV8R

RENOV8R

Well-Known Member
I'd use the one with the voltage regulator. You'll need 5V to power your receiver and possibly both 5V & 12V if you have an FPV system
 
You must log in or register to reply here.
Top