Please help

[Lexoromicon]

I just got a Hubsan h107d fpv quad and the right stick is not self centering but the left one is.
All my other quads are opposite of this and it is making it hard to fly and killing my experience with it.
Is this a factory issue or something i can fix?
Please help

 

[holtneil]

Hi mate the transmitter is in the wrong mode you need mode 2 , I dont know if you can change it I hope Jackson can jump in and tell you for sure

 

[Lexoromicon]

Hi mate the transmitter is in the wrong mode you need mode 2 , I dont know if you can change it I hope Jackson can jump in and tell you for sure

I did set it in mose two as per the instructions but the right still doesnt self center but the left does

 

[Wildwelder]

Sounds like its a factory defect. Spring problem. If you open it up you void the warranty so just return if you can.

 

[holtneil]

Then yes it's a fault I have not got mine to hand to check it out
If you ever order anything again make sure you get a mode2 this saves problems later
I would do what wildwelder said and get it replaced

 

[Lexoromicon]

Then yes it's a fault I have not got mine to hand to check it out
If you ever order anything again make sure you get a mode2 this saves problems later
I would do what wildwelder said and get it replaced

Thanks guys. Its a little deflating but i love the copter so ill so what i have to

 

[holtneil]

There are a few ways to go open it and change gimbals , get a replacement transmitter in mode 2 , I had one at work with broken screen but cant find it I will look again Monday have a look at banggood they do replacement transmitters
http://www.banggood.com/Hubsan-H501...nsmitter-H501S-15-p-1045995.html?rmmds=search
http://www.banggood.com/Hubsan-X4-H...nsmitter-H107D-A05-p-910276.html?rmmds=search

 

[Lexoromicon]

There are a few ways to go open it and change gimbals , get a replacement transmitter in mode 2 , I had one at work with broken screen but cant find it I will look again Monday have a look at banggood they do replacement transmitters
http://www.banggood.com/Hubsan-H501...nsmitter-H501S-15-p-1045995.html?rmmds=search
http://www.banggood.com/Hubsan-X4-H...nsmitter-H107D-A05-p-910276.html?rmmds=search

That's a good deal.

I have been practicing my pinch grip and have been able to fly it. I'll try to post video soon.

Thanks again for the help.

 

[rosco11]

You have the wrong transmitter. If you cannot open it up and swap the pods, order the right transmitter. The Hubsan 107 was my first quad. Great little flier. I bounced it into everything and it still flies, all be it, i think one of the motors is finally giving out. BTW, it works fine with a Fatshark. Spare parts are cheap too, but not worth the effort to me to take it apart and solder in a new motor. Can get a new one without the transmitter for less than 50 bucks. You can also order a 4 in 1 module for a Taranis and fly it off that. If you are going to get a new transmitter, get the best.