No stick movement in Betaflight

[razed1022]

HI all I'm having problems getting FC to recognize receiver. I have a naze32 board, frsky X4R receiver and qx7 tx.
I get it to bind to tx but nothing in beta flight. I have sig, batt, gnd plugged into receiver
on bottom row of pins and the first three "looking down". On FC grnd to grnd, batt to pos and sig on pin 4.
In BF Config I have serial base receiver checked in receiver mode and sbus selected. In ports I only have uart1 and uart 2. I selected serial rx under
uart2. In receiver under channel map i selected frysky.

Thanks for the help.

Thomas

 

[razed1022]

I had spektrum before and worked fine.

 

[razed1022]

I will attach link to pictures and the instructions I used in following post.

 

[razed1022]

Link for pics: https://www.dropbox.com/sh/ucp864c7e441qzn/AACjPCmJm__IIgdsZXAdJ2S5a?dl=0
These are the instruction I used: https://cdn.shopify.com/s/files/1/0412/2761/files/FrSKY_X4R-SB_Naze32_Inverter_Connection.pdf

 

[mozquito1]

The Aux switches need to be assigned in the tx menu before you get stick input on the rx tab.

 

[mozquito1]

I'm on a fly sky but
Channel 5 is my arm switch Aux1 on SWD
Channel 6 is modes on Aux2 SWC.

 

[Jackson]

You did in fact use one of these?
https://www.ebay.com/itm/NAZE32-Fli...637997&hash=item2a7241764f:g:51AAAOSwUchaDw0W