How to set-up a Devo 7E

[roineust]

Hello!
I got right out of the box a new Devention Devo 7E.
As well, i have an Orange RX DSM2 receiver and a servo and a battery.
I would like to learn how to bind them together - but i am having trouble understanding what i should do on the Devo side.
In most Devo video tutorials, the menu looks differently than the one i have, as well as they seem to have a 'model setup' inside the menu and i don't have that menu choice.

Am i supposed to install some kind of firmware on the Devo, when i take it out of the box? what kind of firmware?

Thanks!

 

[Jackson]

they seem to have a 'model setup' inside the menu and i don't have that menu choice.

Look harder, read the manual. Your Devo has a 30 model memory.

Here's the manual.
https://www.dropbox.com/s/1045f9rw9e3x0op/DEVO7E_expe.pdf

If you want to use the Orange RX, you'll need to overwrite the stock FW.
http://www.deviationtx.com/

 

[roineust]

Hey Jackson,
Yup - have already made that part of the learning curve, in the last couple of hours, and have installed the Deviation FW.
Yet, still not able to bind to the orange RX.
On the help forum at Deviation - but still to no avail up to this moment, also checking out the possibility that all of the DSM2 RX i have are out of order.

Thanks.