How to adjust sensitivity of 2-axis gimbal pitch control

[bbodnyk]

I put a cheap 2-axis gimbal on my heavily modded Cheerson CX-20 for my Mobius camera. It works fine however a slight change in the transmitter pitch knob rotates the camera quite a bit. What can I do to decrease the sensitivity of the gimbals pitch control? Currently rotating the pitch knob maybe 5 degrees causes the gimbal to turn a full 90 degrees. I'd like to set the control so rotating the knob fully clockwise will point the camera straight down but rotating it fully counter-clockwise would rotate it up only maybe 30 degrees.

Thanks!
Bruce

 

[Jackson]

cheap 2-axis gimbal

Post a LINK.

 

[holtneil]

Hi if you use a micro usb to access the board use the software from basecam.com
Watch this video and Brian will show how to adjust things but it's easy to do
http://www.google.co.uk/url?sa=t&so...VdJ7wA&usg=AFQjCNHmFRxpZ5qonMCVJnyG-7CwJG13NQ

 

[bbodnyk]

Hi if you use a micro usb to access the board use the software from basecam.com
Watch this video and Brian will show how to adjust things but it's easy to do
http://www.google.co.uk/url?sa=t&source=web&cd=2&ved=0ahUKEwiTxLHJypXLAhVBlhQKHeh5CCUQtwIIJjAB&url=https://www.youtube.com/watch?v=TRBr3VdJ7wA&usg=AFQjCNHmFRxpZ5qonMCVJnyG-7CwJG13NQ

Thanks, that worked!

 

[holtneil]

Hi glad you have it sorted

 

[Fragtastic]

A little necromancy here to inform that it works with this gimbal too. Thankyou so much guys.
http://us.banggood.com/Wholesale-Wa...ntom-GoPro-3-wp-Usa-908068.html?rmmds=myorder