Hugh Hemington
Well-Known Member
I went with the ArduFlyer (RCTimer) and now all my parts are ordered. (my frame is here and built)
frame: Quadcopter "Big Body" (QuadLugs)
controller/autopilot: ArduFlyer 2.5.2 915Mhz telemetry (RCTimer)
esc: 45A (Turnigy)
motors: 1100Kv (Turnigy)
propellers: 11x4.7, (Turnigy)
motor to motor distance: 24 inches (610mm)
battery: 4S 3000mAh 40C (Turnigy) & 4S 5000mah 40C (Zippy)
total weight: 2.2kg
flying time: ???
radio: Turnigy 9X
video/osd: 1.2HHz, 1000mW trans. (LawMate) (no OSD)
FPV cam: Astak CM-7500 ActionPro 3
other: FatShark Base SD goggles
Misc: LEA-6H GPS & compass
Now, I wait, and wait, and wait...
frame: Quadcopter "Big Body" (QuadLugs)
controller/autopilot: ArduFlyer 2.5.2 915Mhz telemetry (RCTimer)
esc: 45A (Turnigy)
motors: 1100Kv (Turnigy)
propellers: 11x4.7, (Turnigy)
motor to motor distance: 24 inches (610mm)
battery: 4S 3000mAh 40C (Turnigy) & 4S 5000mah 40C (Zippy)
total weight: 2.2kg
flying time: ???
radio: Turnigy 9X
video/osd: 1.2HHz, 1000mW trans. (LawMate) (no OSD)
FPV cam: Astak CM-7500 ActionPro 3
other: FatShark Base SD goggles
Misc: LEA-6H GPS & compass
Now, I wait, and wait, and wait...
Last edited: