Hi I creating a new quadcopter. Help Me?

B

Bilal Yılmaz

New Member
Hello! My name is Bilal. I'm Turkish. I creating a new quadcopter.
Is there harmony between the parts ?

How do you think ? Thank you..

Frame : http://www.hobbyking.com/hobbyking/..._300_Through_the_Machine_Drone_Frame_Kit.html

Propoller : http://www.hobbyking.com/hobbyking/store/__22754__Hobbyking_8482_Propeller_5x3_Red_CW_CCW_6pcs_.html

ESC : http://www.hobbyking.com/hobbyking/..._Motor_Speed_Controller_SimonK_Firmware_.html

Flight Control Cart : http://www.hobbyking.com/hobbyking/...ntrol_Board_With_6050MPU_And_Atmel_644PA.html

Engine : http://www.banggood.com/Sunnysky-X2204S-2300KV-CW-CCW-Motor-for-FPV-Racing-p-1045176.html

Battery : http://www.hobbyking.com/hobbyking/store/__8580__ZIPPY_Flightmax_5000mAh_4S1P_20C.html

Battery Charger : http://www.banggood.com/SkyRC-IMAX-...polymer-Battery-Balance-Charger-p-912239.html
http://www.banggood.com/Wholesale-P...ter-For-IMAX-B5-B6-B8-3E-Charger-p-49439.html

Kumanda : http://www.hobbyking.com/hobbyking/..._Module_8ch_Receiver_Mode_2_v2_Firmware_.html
 
Jackson

Jackson

USA member at large
I wouldn't get those 30A ESC, 4 of them will weigh a whopping ~108 grams. If you look at the chart for the motors you chose with the most aggressive prop @ 4S they are <20A.

Something like these look pretty good, with all the latest bells and whistles.
http://www.banggood.com/ZTW-Spider-...hot125-For-RC-Mini-Multirotors-p-1032370.html

And note the weight, with these you would be ~70 grams lighter. That's significant.

You'll need a BEC though as those are Optos.

This power Distribution Board looks decent and has good reviews.
http://www.banggood.com/5V-12V-BEC-...With-Cable-For-FPV-Multicopter-p-1022676.html

Get the XT60 connector and find a battery that also uses an XT60 also. The LiPo you chose is too big, I'd say around 2200 to 3000mAh for the frame you chose.
 
RENOV8R

RENOV8R

Well-Known Member
The battery is much too large in both size and weight. You should be looking for something in the 35C 2200mah-2500mah size
 
B

Bilal Yılmaz

New Member
Jackson said:
I wouldn't get those 30A ESC, 4 of them will weigh a whopping ~108 grams. If you look at the chart for the motors you chose with the most aggressive prop @ 4S they are <20A.

Something like these look pretty good, with all the latest bells and whistles.
http://www.banggood.com/ZTW-Spider-...hot125-For-RC-Mini-Multirotors-p-1032370.html

And note the weight, with these you would be ~70 grams lighter. That's significant.

You'll need a BEC though as those are Optos.

This power Distribution Board looks decent and has good reviews.
http://www.banggood.com/5V-12V-BEC-...With-Cable-For-FPV-Multicopter-p-1022676.html

Get the XT60 connector and find a battery that also uses an XT60 also. The LiPo you chose is too big, I'd say around 2200 to 3000mAh for the frame you chose.
Click to expand...
RENOV8R said:
The battery is much too large in both size and weight. You should be looking for something in the 35C 2200mah-2500mah size
Click to expand...
http://www.hobbyking.com/hobbyking/store/__11950__Turnigy_nano_tech_3300mah_4S_35_70C_Lipo_Pack.html

How do you think this battery?
 
Jackson

Jackson

USA member at large
XT60_PlugEnd.jpg
 
You must log in or register to reply here.
Top