First time using KISS GUI

[Taylor]

Well, a little trouble in paradise... I am currently working on setting up the flight controller and have never used KISS GUI before. I have downloaded all of the correct drivers and even used ImpulseRC driver fixer which said it fixed the drivers, but when I try to connect in GUI the "connect" button changes to "connecting" and then stays there. The one aspect that I'm unsure of is the baud rate for a KISS v1 FC. In my device manager, I believe it shows 9600 (I'll have to double check), but I'm not sure if that needs to be changed. Also, I have already flashed the latest firmware via DFuse and I have the solid green light along with a blue light flashing every second or so, which from what I've read means that the FC needs to be activated and from my understanding can't be done until I am successfully connected to GUI. Any ideas?

 

[Taylor]

Also, I've tried downloading the GUI via Chrome apps (assuming that it's the latest version) as well as 2.0.2, and 1.16.15, all with no luck.

 

[Taylor]

Anybody? I could really use some help! I've been messing with it on and off still with no luck. I may email Flyduino here soon to see if they have any suggestions.