eachine wizard x220 help :/

[alex_.]

So i just got the eachine wizard x220, my first racing quad, and i dont know how to get it flying :/ do i have to plug it into my computer or something? Help plz

 

[Jackson]

i dont know how to get it flying

What did you try 'to get it flying?'

 

[mozquito1]

Did it say it was RTF ready to fly or NRF nearly ready. Before we start with the bind procedure. Does it have a rx in it.

 

[mozquito1]

What Tx did u get with it the flysky i6?

 

[alex_.]

What did you try 'to get it flying?'

it came with the FS-I6 and the FS-IA6 if that helps

 

[alex_.]

What did you try 'to get it flying?'

And what i did to try to get it flying was plug in a battery and turn the throttle up a bit and nothing happened :/

 

[QuadKid]

Read your manual, probably have to "CLI" (Control Lever Initiation) maybe throttle down and to the left or right to bind it?

 

[alex_.]

Read your manual, probably have to "CLI" (Control Lever Initiation) maybe throttle down and to the left or right to bind it?

i do know that the rx and the tx are bound to each other, so now all i have to do is look in the manual i think?

 

[alex_.]

i do know that the rx and the tx are bound to each other, so now all i have to do is look in the manual i think?

what if i lost my manual :/

 

[mozquito1]

Turn Tx on. plug battery in quad, push both sticks to bottom left or bottom right. Apply throttle. The arm maybe on the sticks. You can change them in modes tab in cleanflight or betaflight. Better if you put the Arm on auxiliary1 & set the range.
Then on the Tx. Apply channel 5 to swd.
Then auxiliary 2 is modes on swc,
The 3 position switch. Set the range. You only have to set angle & horizon. And set Aux2 on the Tx to channel 6. If can't get the jist I'll write it in steps properly I'm in work at the moment.

 

[alex_.]

Turn Tx on. plug battery in quad, push both sticks to bottom left or bottom right. Apply throttle. The arm maybe on the sticks. You can change them in modes tab in cleanflight or betaflight. Better if you put the Arm on auxiliary1 & set the range.
Then on the Tx. Apply channel 5 to swd.
Then auxiliary 2 is modes on swc,
The 3 position switch. Set the range. You only have to set angle & horizon. And set Aux2 on the Tx to channel 6. If can't get the jist I'll write it in steps properly I'm in work at the moment.

cleanflight and beta flight are chrome extensions, i downloaded those and plugged the little usb thing into the computer and my drone but it didn't auto-connect...?

 

[Jackson]

Skip ahead to the 10 minute mark.

 

[LoneRCRanger]

Hey Jackson, the last of the video at the 10 minute mark is just flying. What exactly are we supposed to see there?

 

[Jackson]

Sry , 4 min mark covers arming.

 

[alex_.]

ok, so if i got the bnf version, would you still have tips for finding the arming thing?

 

[Jackson]

it came with the FS-I6 and the FS-IA6 if that helps

ok, so if i got the bnf version, would you still have tips for finding the arming thing?

HUH? Enough is enough.

There are tons of YouTube vids on this very popular quad. Start looking.