JesseRyan
Member
Hello All!
I know this is my only post on this forum and I understand that is not ideal for selling my copter. But unfortunately I need to get this sold as soon as possible. I really don't want to sell it but I simply do not have time any longer, a new job has come up so I need to move this guy. I built and tuned this copter in Montana at Quadrocopter last year in their build program. Everything is in Perfect working condition, No crashes, No hard landings, Nothing wrong at all.
What you would be buying is a fully ready to go Cinestar 8 basic with
MK electronics
MK GPS with Waypoint Flying
MK Power Distribution Board
MK Fight Control 2.2 Upgrade
And FreeFly 360 Gimbal with Radians.
Perfect for pretty much any DSLR or similar camera.
Asking $4,500
Local Pick up in Los Angeles, Ca preferred but willing to ship but will have to add in the cost.
Also,
Tuning
1x Asus laptop with MKtool and Radian tool installed
1x MK Bluetooth Module (For MK GPS App in MK tool)
All cables included for connection to PC
Downlink and FPV
2x Lawmate 1.2ghz receivers and transmitters
1x SmallHD 7.5in Monitor with Hood and Canon battery mount
1x Lilliput 7.5in Monitor with Hood and Canon battery mount
Currently Installed GoPro used for FPV, Will include it if desired
(I have a small fpv camera not Installed but it is included)
1x StratoSnapper (for remote shutter release, linked to spectrum dx8)
1x SmatOSD
Radios
1x Graupner MX20 Radio with Monitor mount and Harness
1x Spektrum DX8 with Monitor mount Harness
Batteries
4x Quadropower 4s 8,000mah Batteries
5x Quadropower 4s 10,000mah Batteries
1x Quadrocopter 3s 1,200mah Battery
4x Black Series 3s 1,800mah Batteries
4x Fat Shark 2s 1,000mah Batteries
Chargers
1x Efuel Power supply
1x Hyperion EOS 720i Duo 3 Charger
1x CopterX B601 Charger
Traveling Cases
3x Pelican Cases
1x Walkera Carry case
1x Storm Case (Not in pictures)
Extra parts
1x Boom
1x Motor
1x Landing Gear
2x Pulleys
2x Belts
1x Servo
Various Hardware
If you would like more photos or specific photos just let me know.
Thank you for the time!
- Jesse
I know this is my only post on this forum and I understand that is not ideal for selling my copter. But unfortunately I need to get this sold as soon as possible. I really don't want to sell it but I simply do not have time any longer, a new job has come up so I need to move this guy. I built and tuned this copter in Montana at Quadrocopter last year in their build program. Everything is in Perfect working condition, No crashes, No hard landings, Nothing wrong at all.
What you would be buying is a fully ready to go Cinestar 8 basic with
MK electronics
MK GPS with Waypoint Flying
MK Power Distribution Board
MK Fight Control 2.2 Upgrade
And FreeFly 360 Gimbal with Radians.
Perfect for pretty much any DSLR or similar camera.
Asking $4,500
Local Pick up in Los Angeles, Ca preferred but willing to ship but will have to add in the cost.
Also,
Tuning
1x Asus laptop with MKtool and Radian tool installed
1x MK Bluetooth Module (For MK GPS App in MK tool)
All cables included for connection to PC
Downlink and FPV
2x Lawmate 1.2ghz receivers and transmitters
1x SmallHD 7.5in Monitor with Hood and Canon battery mount
1x Lilliput 7.5in Monitor with Hood and Canon battery mount
Currently Installed GoPro used for FPV, Will include it if desired
(I have a small fpv camera not Installed but it is included)
1x StratoSnapper (for remote shutter release, linked to spectrum dx8)
1x SmatOSD
Radios
1x Graupner MX20 Radio with Monitor mount and Harness
1x Spektrum DX8 with Monitor mount Harness
Batteries
4x Quadropower 4s 8,000mah Batteries
5x Quadropower 4s 10,000mah Batteries
1x Quadrocopter 3s 1,200mah Battery
4x Black Series 3s 1,800mah Batteries
4x Fat Shark 2s 1,000mah Batteries
Chargers
1x Efuel Power supply
1x Hyperion EOS 720i Duo 3 Charger
1x CopterX B601 Charger
Traveling Cases
3x Pelican Cases
1x Walkera Carry case
1x Storm Case (Not in pictures)
Extra parts
1x Boom
1x Motor
1x Landing Gear
2x Pulleys
2x Belts
1x Servo
Various Hardware
If you would like more photos or specific photos just let me know.
Thank you for the time!
- Jesse
Attachments
Last edited:
