doug micheletti
Well-Known Member
First I would like to say thanks for all the assistance I received on my previous thread - those issues seem to be resolved except:
When I have the cable going from CH5 on the my receiver to the 5th spot on my KK2 board - I can not arm, and the light on my receiver does not come on. If I unplug this wire - it will arm and everything functions normally.
I suspect there may be a setting I have wrong in the mixter settings on my board? Something must be set wrong relating the AUX channel to make it function this way. I have trieed different settings but always same result.
I have a Turnigy 5X transmitter and a Turnigy TGY-5RX reciever on a SK450 copter bought as RTF from Hobbyking. KK2.1.x is reflashed to Steveis 1.8and everything except for this function appears to work correctly. I currently have the self leveling set to stick and can turn it on/off that way so the function works - I would rather switch it using the CH5 switch...
Your input is most welcome! Thanks!
Doug
When I have the cable going from CH5 on the my receiver to the 5th spot on my KK2 board - I can not arm, and the light on my receiver does not come on. If I unplug this wire - it will arm and everything functions normally.
I suspect there may be a setting I have wrong in the mixter settings on my board? Something must be set wrong relating the AUX channel to make it function this way. I have trieed different settings but always same result.
I have a Turnigy 5X transmitter and a Turnigy TGY-5RX reciever on a SK450 copter bought as RTF from Hobbyking. KK2.1.x is reflashed to Steveis 1.8and everything except for this function appears to work correctly. I currently have the self leveling set to stick and can turn it on/off that way so the function works - I would rather switch it using the CH5 switch...
Your input is most welcome! Thanks!
Doug