Bouncing quadcopter

[David Farrill]

I have a turbo ace matrix quad that I recently installed a eagletree vector color with osd and I can't seem to resolve the problem of it bouncing violently when landing 2-3 feet resulting in multiple tries or breaking landing gear.I recently upgraded from a naza light and it did not do this at all.Is there a setting or gain I can adjust to stop making it do this?

 

[holtneil]

Hi mate the P gain is to high lower by 5 points and try it till you stop it but dont go to low or quad will feel strange

 

[David Farrill]

Hi mate the P gain is to high lower by 5 points and try it till you stop it but dont go to low or quad will feel strange

What does the"p"stand for?
Thank you for your help...David

 

[David Farrill]

I think you mean pitch...right?

 

[David Farrill]

Yea...your advice was correct!
The factory default on pitch was 100...
after several test turning it down it got better and better.Finally at 35 it seems to have stopped.The roll and yaw was at 100 as well...I turned them down to 80...not sure if that did anything or not..I feel a little better now to fly it and if it Flys well experiment with some fpv.THANK YOU!!!

 

[holtneil]

Hi mate to test roll and yaw just do sudden stops and stick movements if quad wobbles before it stops then gains are to high