photojunky
Well-Known Member
I am going to be building a quadcopter based on the Tarot Iron Man 650 frame with a Pixhawk PX4 flight controller. I am thinking about getting the Motors in the link below. They are Tarot 4114 - 320 KV Motors. The reason I am getting them is because they run on a 6S battery and I have new esc's laying around that only use 6's batteries. They recommend using 15 to 16 in props but I intend on using 17 in props. It should be no issue because the frame they recommend these motors be used on is slightly heavier than my frame. What do you guys think? Any advice is welcomed. Thank you.
http://www.helipal.com/tarot-4114-h...MI5LXbydqj2wIVUwOGCh0CLQd5EAQYAiABEgIRl_D_BwE
http://www.helipal.com/tarot-4114-h...MI5LXbydqj2wIVUwOGCh0CLQd5EAQYAiABEgIRl_D_BwE