cc3d

  1. A

    Wanted suggestion of choosing cc3d as flying controller

    Hello I am beginning to develop quadcopter,and interested to use cc3d as it's cheap.Please suggest on the use any cons to consider,any better alternatives.Also plz guide if any good guide to build the quad with minimal features
  2. Yog Dharaskar

    Messed up my CC3D

    Hi, I have a non-working OpenPilot CC3D and I think I messed it up myself. I want to get to the depth of the problem and solve it. I do have a Brain, a Seppuku (dronin) and a couple of Naze32 REV6 Full version boards around but they are all in use. The point is I had installed BetaFlight on it...
  3. N

    Problems plaguing my first build

    I have posted these questions on multiple forums before and so far have yet to come across a straight answer as to how to go about fixing the problem I've been having with my first build. This quadcopter has been earthbound for about 4 years now, and admittedly the first mistakes were due to a...
  4. N

    1st quadcopter build causing a variety of issues.

    My roommate and I decided 2 years ago that it would be a fun challenge to learn about and build a quadcopter from scratch. We even planned on making our frame from scratch with 3D printed parts, but eventually settled on a premade one. This is the parts list we drew up Turnigy 850kv brushless...
  5. A

    Transmitter Help

    I am new to drones and I have completed my build for the most part. I'm using a cc3d flight controller, a orangerx receiver and I have a dx6i transmitter. Everything seems to be working good and it connects to cleanflight and I can change all the settings. My problem is that my dx6i shows that...
  6. Yx0

    IBUS no oneshot125 or PPM with oneshot125? (CC3D FC)

    Hi, I'm building my first quad here. I'm using CC3D FC. Latest OpenPilot 16.02 version added IBUS supported which is great (I got FS-i10b receiver). My first choice of connection for the receiver was IBUS using flexi port on the CC3D (which works) but now I discovered that I can't enable...
  7. I

    Transmitter setup problems (random movement), please help!

    My first build is a 250 with a CC3D flight controller and a FS-t6 transmitter/corresponding receiver. I have been able to successfully calibrate the quad using the libre pilot software. However once i get to the transmitter setup wizard i cant successfully setup the transmitter. The software...
  8. S

    F330 Quadcopter Help

    I have assembled a F330 quadcopter. But when I start flying it, I get a weird problem. When I give it a little throttle and keep it there, the propeller speeds doesn't stay the same. The increase, every propeller in different rates and then suddenly go crazy. I have tried 2 flight controllers...
  9. SinisterWeasel

    C33D settings won't save with LibrePilot - any advice?

    Hello, first post and I am asking for help already :) I updated OpenPilot to LibrePilot yesterday and all went well, I had to delete previous software in rescue mode first but the setup process is fine. I can fly the quad and it is stable - until the battery is removed, then all the settings...
  10. S

    First quad setup, cannot get motors to spin using OpenPilot and LibrePilot

    I'm using a CC3D board with 30AMP Afro Simonk ESC's and Sunny Sky motors. In the setup wizard what settings do I use PWM, PPM, OneShot, and have no idea what any of those stand for. I'm using a T-FHSS 8-channel Futaba Receiver. Every time I go through the setup wizard and plug in the battery the...
  11. Kealan

    Tx servo control

    Hi I was just wondering if it is possible to control a servo using the potentiometer on my tx. It's a tgy i6. My fcb is the CC3D. If it's possible, how would I go about it? Do I connect the servo to the reciever or the flight controller? My reason for wanting to do this is so I can mount my...
  12. Michael Fenimore

    FKS 250 with CC3D FC

    This may be the wrong place, but any help will be greatly appreciated. I took the plunge and bought a preassembled 250 racer from Amazon. The FKS 250 with CC3D and the Flysky FS-i6 radio and its companion receiver. Of course there were no instructions included so I'm at a standstill at the...
  13. Kealan

    DIY Servo gimbal help

    So iv 3D printed a 2 axis servo gimbal for my quadcopter. I have put it all together only to realise one problem. How do you get the servo that controls the roll to have a strong and secure connection to the rest of the gimbal?? For example https://i.ytimg.com/vi/dOu_MZyWr8w/maxresdefault.jpg...
  14. cookie1985

    Flips on take off, cc3d help

    Hi Community, I have been building my first quad, and when I have gone to test it, it flips on takeoff. I have the below specs: openpilot cc3d 4 x DYS 2830-14 750kv 4 x 14x4.7 props (cw & ccw) Hobbypower simonk 30a esc w/ bec 490mhz Turnigy 30-40c 1000mah 4.s (testing battery) frsky x8r...
  15. W

    250 Quad Troubles with openpilot or TX? I am at a loss???? HELP!!!!

    Aloha Guys, I have just recently my first Quad kit, I have played with plenty of store bought drones and a Hubson X4 but this is my first kit. Below is a link to the clone kit I purchased. http://www.amazon.com/gp/product/B010FMGUS8?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00 Here is...
  16. I

    Frustrated Newbie

    Hi Guys and Merry Xmas to you all. Need some help with the Naze 32 Full board ( 2nd New one ! ) it's the REV5 version and i'm using Cleanflight to Flash with. I say 2nd because the Fist one just will NOT Flash any Firmware at all ? Now the 2nd one i'm on now will allow me to flash the latest...
  17. T

    Need help - OpenPilot Revo Altitude Hold

    Hi guys , im building my first quadcopter and i have already got the below flight controller , http://www.banggood.com/OpenPilot-CC3D-Flight-Controller-Bent-Pin-STM32-32-bit-Flexiport-p-956366.html I am not sure whether its a genuine CC3D or not but what i know is it doesnt support altitude...
Top