Search results

I have just completed building my first quad and I have used self-tightening bolts on the motor. However, now I need to change the first prop, but I cannot get the bolt loose. Does anyone have any tips to get the bolt loose (and I have double checked which way to loosen the bolt).

I have the FS-i6 transmitter and I am trying to map it in Cleanflight. I am having quite a lot of trouble. I have read many other forums, none of which have worked. Currently I am mapping like this: 4ARTE123 AND I have all of the channels reversed on my RX. This gets everything correct except...

But is there any way to connect it just using PWM?

I have the Naze32 Acro Rev6 and a receiver that doesn't support any type of CPPM, only PWM. I also have servo leads (if they are needed). I can't seem to find how I can connect the 2 together. All of the tutorials seem to use CPPM. So, how can I connect my Naze32 Acro Rev6 to a PWM receiver?

So you put the CCW threads onto the CW props and make them spin CW so they torque themselves tighter instead of looser, right?

I know where to put CW and CCW props and which way the motor has to spin, however, I have gotten some motors and the top parts (I'm sorry I don't know the exact name, it is the little cone that holds the props in), some screw in CW (i.e. righty tighty) and some screw in CCW. Should the motors...

It seems that may be the case. When I measure them it looks like it is a little bit smaller than 5mm but I think that may be the result of the bezel at the top of the screw and me not putting the ruler across a diameter (sorry I took pictures but they are too large to upload!).

Do http://www.getfpv.com/gemfan-5x3-carbon-nylon-propeller-2-blade-set-of-4-black.html?utm_source=google_shopping&m=simple&gdffi=747627bc7e464db68e5f529d971aacf3&gdfms=EE79E96A008D450FBC84DC1C42E70524&gclid=CjwKEAjw7e66BRDhnrizmcGc8VcSJABR6gaRtZWVfF64_8c8nWBNRWUXIU1ZLp6DFqFkhC75z28bERoC72fw_wcB...

I'm sorry I'm a bit confused with the specs on these motors: https://www.amazon.com/gp/aw/d/B01E56CUSO?dpID=51vm8VevvLL&dpPl=1&keywords=2300kv%20brushless%20motor&pi=AC_SX236_SY340_QL65&qid=1465170133&ref=plSrch&sr=8-4#LUXAddressSelector_1465247087977 Will they fit a prop with a 5mm hole or will...

I'm sorry this is my first time on this forum, hopefully this is in the right place. Regardless, I purchased my first balance charger for LiPos and other battery types, however, all of my batteries use the XT60 connector but the charger only has a Deans connector. Would it be safe if I...

I'm sorry this is my first time on this forum, hopefully this is in the right place. Regardless, I purchased my first balance charger for LiPos and other battery types, however, all of my batteries use the XT60 connector but the charger only has a Deans connector. Would it be safe if I...