Search results

  1. S

    Eachine Racer 250 New Board

    Upgrade to a better VTX, got it. Thank you for the explaination.
  2. S

    Eachine Racer 250 New Board

    I have two cameras. The stock one for Eachine Racer 250. That one I am unsure if it works anymore. I bought a cheap FPV from Horizon Hobby. It has very short range. The only way to increase range is to buy a whole new VTX system. But how do I know if the Eachine Racer 250 VTX is broken?
  3. S

    Eachine Racer 250 New Board

    Okay, so the only thing to do is buy a battery for my VTX system and see if it works? If not, buy a new receiver and camera?
  4. S

    Eachine Racer 250 New Board

    The new one works. It just has like 10ft of range. :P So if the transmitter gets hot, could it still be broken? Should I just get a new camera and transmitter?
  5. S

    Eachine Racer 250 New Board

    Sync: Get the camera to send video feed to my monitor that has the receiver. I'm still new but I must figure out what 5vt and 12vt means. What I do know is that the 600mw transmitter that I think broke does require a much higher voltage as opposed to the Horizon Hobby 25mw camera. The Horizon...
  6. S

    Eachine Racer 250 New Board

    So why wouldn't the new camera work with my drone if I can get it to sync with my fpv gear? No camera can work when hooked to the power supply of my drone. How would buying a new transmitter and maybe a camera allow me to gain FPV?
  7. S

    Eachine Racer 250 New Board

    Yes, the ESC is connected to the board with the transmitters and my battery plugs into it. The alternative is to get a seperate battery to power my VTX. I tried the 3.7V 150mili amps and could not power it.
  8. S

    Eachine Racer 250 New Board

    So I noticed that a capacitor on my drone has been knocked off and I cannot find it after a crash. The VTX gains power but does not sync with my monitor. I tried a different camera by Horizon Hobbies and all it does is get hot. Would buying a new power board remedy this issue? If so, would I...
  9. S

    Sync monitor and camera

    I think I have found the problem. One of the capacitors are missing! One is missing on the rear right. I feel very awful for not catching this. I suppose this is why the VTX receives power then? So I bought a Horizon 1100 all in one camera and power it with a 1s 3.7v battery. Now I can fly...
  10. S

    Sync monitor and camera

    For very brief moments.
  11. S

    Sync monitor and camera

    No. I also tried a new VTX on every channel and sti got nothing.
  12. S

    Sync monitor and camera

    I have the RTF Eachine Racer 250. I did crash twice. I can get the bird to fly. I CANNOT get the monitor and camera to display FPV. I kept checking the wires, tried messing with video and channel settings, and I cannot get FPV to work. Does anyone have any suggestions? Thank you. EDIT: I forgot...
  13. S

    Motor keeps spinning

    Just soldered two new ESCs and one new motor. For some reason, on the old motor, it keeps spinning even when I get off the throttle. Any ideas?
  14. S

    I broke it

    I apologize for asking such remedial questions; how do I connect the bird to my PC?
  15. S

    I broke it

    And if replacing older parts for new motors and ESCs, do I need to tune it via some PC sowftware?
  16. S

    I broke it

    If I have to replace the ESC and motor, do I need to tune it? Also, two broke off completely It fell apart while in flight. How do I know if CW is left and CWW motor is right?
  17. S

    Repaired 250

    Idk if I can do that on my i6 eachine controller. My drone came RTF so Idk what's what.
  18. S

    Repaired 250

    Hahaha no. XD I tried to bend them in place cuz I'm outta props at the moment and the new ones could take 2 weeks to get here. Like I said, the thing flys fine aside from the drifting left. But if jt's just the props then I'm good.
  19. S

    I broke it

    Well, it flys fine. I tried full throttle, pitch, and yaw. It just wants to drift right. When those parts come in I guess I'll just replace the fore arm. I just find it odd that it wants to drift right. The last thing I can think of is that I used screws instead of hex key fasteners and the...
  20. S

    I broke it

    Thank you for all the help. I have gotten it to fly now, however, the drone wishes to drift right now. Keep in the front right arm was fractured in three areas, so I super glued it. The front right and back left props were bent and actually I accidently melted the back left a tad because I was...
Top