Search results

  1. Street

    Eachine Qx80 motors spin with no input once battery is connected

    Okay thank you. I got the motors to stop spinning. I haven't applied your setting yet but the next issue I'm having is I can't seem to get it armed. I set up a mode for aux1 but no matter what I do it won't arm it. any ideas?
  2. Street

    Eachine Qx80 motors spin with no input once battery is connected

    here is the clean flight dump if that helps. I'm using a devo 7e with deviation 5.0 with a eachine qx80 which uses the evo f3 & Entering CLI Mode, type 'exit' to return, or 'helps # version # Cleanflight/SPRACINGF3EVO 1.13.0 Jun 6 2016 / 00:03:29 (a77bc76) # dump # version #...
  3. Street

    Eachine Qx80 motors spin with no input once battery is connected

    I build a new quad and I hit save in cleanflight and now my motors won't stop spinning. I don't think I changed anything but the second I hit save it's been having this issue ever since. Any idea. Also I notice in cleanflight that the receiver is using right stick as throttle and pitch instead...
  4. Street

    THE GAP HUNTER RETURNS!!!

  5. Street

    ILLUMINATED GLORY!!!

  6. Street

    Sometimes a GAP presents itself that just CAN'T be passed up!

    LOL.......It's a whoop man. No Foul
  7. Street

    New favorite place to fly the Whoop - OFFICE WHOOPING FAST LAPS

    I love being able to fly anywhere! That is what is most fun for me.
  8. Street

    New favorite place to fly the Whoop - OFFICE WHOOPING FAST LAPS

    This is my new favorite place to fly the whoop. I think the halls make it feel so fluid and fast. It's an awesome experience. I'm hoping to get my co-workers into the hobby so we can race. Our company runs commercial quads here for Orthography, 3d modeling & Land Surveying but the real fun is in...
  9. Street

    HITTING THE GAP!

  10. Street

    SETTING THE TINY WHOOP FREE!

  11. Street

    #MicroFPV Crash Compilation

  12. Street

    The High Speed Ring! #MicroFPV

  13. Street

    Street Side #MicroFPV Aerobatic Goodness

    Setup: Frame: Phoenix Flight Gear 110mm Flight Controller: Hubsan X4 H107C Motors: 8.5mm Hubsan X4 H107C FPV Camera: FX797T Battery: 1S 500mah Lipo FPV Display: Custom Quanum V2 Goggles Weight: 50g Flight Time: 7min+
  14. Street

    Cheap, yet good FPV setups to get you started

    btw......... what size jack is that on the boscam for video? 1.5mm and 3.5mm are the common ones right? Is there a 2mm jack? I'm trying to figure out what I need. I'm pretty sure it's a 1.5mm jack
  15. Street

    Cheap, yet good FPV setups to get you started

    Thank you!
  16. Street

    Cheap, yet good FPV setups to get you started

    Do you know of a decent DVR that will plug into the second video out on this receiver? I've been running a micro quad and want to record fpv http://www.banggood.com/FPV-5_8G-8CH-200mW-AV-Wireless-Receiver-RC805-p-73202.html
  17. Street

    hubsan x4 only getting 50 feet range?

    Okay I found the antenna. It's a long wiggly line at the front end of the fc. I cleared any wires and tape away from it but still no luck. it just hits this dead spot about 40 to 50 feet out. I'm not sure why it's so poor. The frame is carbon fiber but the board isn't touching anywhere. The quad...
  18. Street

    hubsan x4 only getting 50 feet range?

    Thanks for the reply Jackson. The "Unneeded" The Tape? I'm not sure. I don't even see an antenna on it. Is there an antenna? I figured it was just something built into the board itself. Could the tape be messing with it. Maybe i'll try without but it's driving me nuts.
  19. Street

    hubsan x4 only getting 50 feet range?

    WTF Yo! I thought these were capable of up too 100 meters. I converted my Hubsan x4 guts onto an after market frame and it flies like a dream but it only gets like 50 feet range. I'm not sure what that is all about. I've covered the board with electrical tape to help hold it on top of the foam...
Top