Search results

evening all, after a a few months building my hex, I'm still have issues with the bloody dpi zenmuse gimbal, being dji and the rest of the hardware also being dji i thought it would all work well together.. well it doesn't and the gimbal has been a complete F££**NG pain in the arse!!! so heres...

Hi All, can any explain how to do a throttle calibration with a taranis Plus x9d, X8r receiver and A2 FC using s-bus. any thoughts would be great cheers Billy

Hi All, i have the following, tarot 650, with 1550 props, emax 4008-470 and DJI A2 FC. I'm still tweaking and getting things to settle down and today I noticed that when going forward the quad gained some serious height without touching the throttle... when i mean serious it was more like 5-10...

Hi All, i have a tarot 650 ironman, with max 4008 470 motors, max 4in1 and 15" props and since swapping adding the new motors and A2 both the cw motors are hot after 5 minutes test flight, this is only hovering to set the gains and i haven't gotten any further. also fights when turning one way...

So! i decided to get a Dji A2 Fc and have a go with this.... just one observation and it was on my maiden test flight. In gps mode, the quad was turning counter clockwise, and took a full stick of right rudder to stop it, once i released the stick the quad carried on turn in a circle (tight...

currently i use the Emax 3510 6ookv which seem pretty good But the thread has got on one already, possible my only fault for over tightening, but a worry neither the less. So to foresee the future is it worth paying double the price for T-Motors? i could theoretically buy 8 Emax 4008's for the...

Hi All, another curve ball from the guy that wants it to all work perfectly but without buying it all ready done!!! my own worse enemy... changes I've made recently which seem to be giving me more jello and shake than before. just wanted some thoughts to see if any one else has come across...

Hi all, I'm looking to upgrade my gimbal, as i think i rushed in a brought one that isn't very good. i appreciate and feedback on what you are using. id like to keep it to go pro size and non dji compatible. main uses like most people really I'm after some great video footage. cheers

hi all, I upgraded to the turnigy ia10 10 channel, which I'm really happy with. Not that I've had the pleasure of the more expensive TX, so cant compare, but for me I really like it. BUT... I'm only getting about 200m distance before the low signal alarm starts blurting! Anyone else had this...

Hi Guys, anyone running a Tarot 650 quad and the tarot ZYX-M flight controller, would like some information on the adjustable gains. cheers Billy

Hi All, struggling a bit and wondered if i could get some advice..... tarot 650 iron, with tarot zyx-m controller, max 4in1 and emax MT3510-600, 12 x 4.0 props everything is working but I'm not getting enough lift, I've calibrated although mine sounds different to others i have watched on...

Hi All, struggling a bit and wondered if i could get some advice..... tarot 650 iron, with tarot zyx-m controller, max 4in1 and emax MT3510-600, 12 x 4.0 props everything is working but I'm not getting enough lift, I've calibrated although mine sounds different to others i have watched on...

Right heres a challenge for all you experts out there. upgrading the quad to the following and have a couple of questions at the end, if anyone can help? Tarot Ironman 650 Pixhawk Px4 or Naza M V2? Emax 4in1 30amp Esc Emax MT3510 600v PPM encoder for pixhawk as i have a Turingy IA10 questions...

hi guys, wonder if i could ask for some advice please.... currently whilst landing my quad and keeping the throttle firmly down the motors keep spinning for a good 10 seconds, definitely two of the motors are doing this if not three. using Apm flight controller, afro 30amp speed controllers...

any reason for a speed controller to not arm (go green) haven't had a serious enough accident to warrant it to stop working. now flashes red once, followed by a break then twice, read a bit on line but meant nothing to me. can anyone give me a layman's definition? is it dead? cheers

hi all, not sure whats changed but I'm now unable to arm my Apm in loiter mode, previously worked fine? has anyone else experienced this? and how to i sort it out? i reinstalled the firmware through mission planner but nothing has changed. loiter works once quad is armed and flying, but i...

hi all, i recently purchased a Turing 9x and the recommended battery (Turnigy 2650mAh 3S 1C LLF Tx Pack) to go with it from the online website for our toys. i adapted the connecting socket as i had read through different threads and charged correctly. i connected to the TX and switched on...

Hi All, really new to quads, and have brought my brothers built quad which is great, but my only real reason for buying of him other than a bit of fun is photography. i like the look of "FeiYu Tech Mini 3D 3-Axis Brushless Gimbal" or its big brother "FeiyuTech G3 3-Axis Brushless Gimba" can...

hi all, This is my first post and definitely not my last.... I've just brought my brothers quad shush was self built and with configuring some parts my brother stated using mission planner, from what I've seen its on windows compatible. The question is: is the a similar program that will work...