Search results

  1. B

    Dji Zenmuse H3-3D with A2 FC

    evening all, after a a few months building my hex, I'm still have issues with the bloody dpi zenmuse gimbal, being dji and the rest of the hardware also being dji i thought it would all work well together.. well it doesn't and the gimbal has been a complete F££**NG pain in the arse!!! so heres...
  2. B

    throttle calibration

    Hi All, can any explain how to do a throttle calibration with a taranis Plus x9d, X8r receiver and A2 FC using s-bus. any thoughts would be great cheers Billy
  3. B

    quad gains height when going forward?

    Hi All, i have the following, tarot 650, with 1550 props, emax 4008-470 and DJI A2 FC. I'm still tweaking and getting things to settle down and today I noticed that when going forward the quad gained some serious height without touching the throttle... when i mean serious it was more like 5-10...
  4. B

    CW motors overheating

    its funny, when i used the standard tarot motor mounts that came with the 650 i did pretty much the same and didn't come across any issues, but since adding new tarot motor mounts which probably give an extra 1 - 2" per arm this is where I've struggled of late. but no more!!! if you click on...
  5. B

    CW motors overheating

    so after some reading on the old inter web, i think it just came down to the motor mounts not being level. I mucked around for hours try to set them up, (downloaded a really good spec app) as if the floor is slightly off the quad is then off and it was a mission!!! but the flight today was bang...
  6. B

    CW motors overheating

    I'm pretty sure its smooth, but ill let you know tomorrow. i set the motor mounts with real precision this afternoon but won't get to test until the morning.
  7. B

    CW motors overheating

    Hi All, i have a tarot 650 ironman, with max 4008 470 motors, max 4in1 and 15" props and since swapping adding the new motors and A2 both the cw motors are hot after 5 minutes test flight, this is only hovering to set the gains and i haven't gotten any further. also fights when turning one way...
  8. B

    DJI A2

    15" tiger motor carbon fibre props. Using the tarot quick release attachments.
  9. B

    DJI A2

    Hi Ringalong, not 100% sure what you mean by "motors spin freely" yes they do but with some resistance, radio and FC all Calibrated correctly. i went through my check list level the motors on the arms, which were all pretty close but i wondered if a prop was way off! double checked all my...
  10. B

    DJI A2

    Thanks Renov8r, Gps is pointing the right way, no1 is on my list to go through. Cheers Billy.
  11. B

    DJI A2

    So! i decided to get a Dji A2 Fc and have a go with this.... just one observation and it was on my maiden test flight. In gps mode, the quad was turning counter clockwise, and took a full stick of right rudder to stop it, once i released the stick the quad carried on turn in a circle (tight...
  12. B

    Big One here...

    post a picture when she's done, would like to see. cheers Billy
  13. B

    motors

    Thanks guys, I've upgraded to a set of Emax 4008. Which are half the price of the t-motors. Let's see how I get on.
  14. B

    Gimbal

    thanks Renov8r, i'll definitely give it a go.
  15. B

    motors

    cheers guys, I'm using t-stlye carbon props so only two screws! could add the adaptor but prefer not too.
  16. B

    Frustrated!!!

    thanks Jackson, i did some research after posting and its the same as yours, i thought it need to be on to send the signal to the transmitter, apparently not! cheers again.
  17. B

    Frustrated!!!

    thanks Twainhearts, I've been looking in to balancing the motors as well, next on the list. I've also ordered a new balancer to help me out.
  18. B

    motors

    Thanks again Renov8r. I'll check out those Marspower Cheers Billy
  19. B

    Gimbal

    To be honest Renov8r, No! Can they be that far off balance? I've seen a couple of ways, lazier pointing at mirror that's attached to arm of quad and small lazet attached to the arm... What would you suggest? Cheers Billy
  20. B

    Frustrated!!!

    Bud, thanks for your support but your not helping. :(
Top