Search results

  1. K

    Throttle blip makes me flip! (video)

    Hi Whitestar, unfortunately for me the only solution that ever worked was replacing both the motor and the esc. I have experienced a couple other times where just replacing the motor worked as well, so I would suggest trying that first. I believe the correct term for what we are experiencing...
  2. K

    video feed cuts out during rolls

    Wafflejock thank you very much for the reply, I appreciate it! After reviewing the thread you attached I started investigating the voltage spike situation and found out my vtx was resetting (static screen instead of blank screen for the camera cutting out) so it was definitely getting voltage...
  3. K

    video feed cuts out during rolls

    Hello! so I just finished a flight controller swap and everything is working very well except for some reason when I do fast rolls and flips (full stick positions) my video cuts out. Oddly if I do rolls and flips slowly the video is fine. If I do full throttle it is fine as well. It is...
  4. K

    Throttle blip makes me flip! (video)

    Thanks for the reply! I'm not entirely sure, but I don't believe this board (spracingf4s) has a 5th pad to work with. As far as I can tell it's just the 4 corners of the board with esc pads. Is there a multimeter test I could do? I've just played around with measuring resistance between a...
  5. K

    Throttle blip makes me flip! (video)

    I wanted to share another video perhaps it might help someone who understands more than me. This video just shows using betaflight motors tab to spin motors up quickly to full throttle. 3 others perfectly fine but the 4th does this stuttering crap. I've also tried a couple combinations of...
  6. K

    Throttle blip makes me flip! (video)

    Hi and Merry Christmas! I'm looking for some help with an issue I've been dealing with for a while now. I'm flying an armattan chameleon with all armattan stuff, armattan velvet motors and 30a escs and spracing f4s board. I've been encountering this problem where occasionally after a crash I...
  7. K

    Motor stutter at full throttle why?

    Hello! I recently had a bad crash, I flew right into a metal poll! That's what flying with low light got me....anyway, I'm flying an armattan chameleon and it took it very well, only some bent aluminum and one solder joint on one esc popped off...so after making my repairs the quad is...
  8. K

    Motor bell housing swap?

    yeah I'm not liking them right now for the same reason lol. I do have a replacement on order I'll just be waiting for it. I could use Loctite but I don't like the idea of using it for props since I have to swap them often.
  9. K

    Motor bell housing swap?

    To follow up, after replacing the burnt out CCW motor with a spare CW motor I had I've def had problems keeping the prop on. The first time it came off was from a crash, not a bad one I just hit a tree branch but the small impact was enough to unloosen the prop, so lost the prop, prop washer...
  10. K

    Motor bell housing swap?

    lol ok, thanks
  11. K

    Motor bell housing swap?

    Yeah I suppose I could just do some punch outs and see if the prop comes loose for now. I might still try swapping the bell housing at some point just to experiment and see if it works....just to tinker around
  12. K

    Motor bell housing swap?

    Hello, I recently had a motor burn out (smoked) from a bad esc. I replaced the esc with a spare, however the only spare motor I have is for the opposite direction that I need (shaft thread direction). Since I'll be waiting a while for the replacement to arrive, I was wondering your thoughts...
  13. K

    CLRACING F4s flight controller no longer support DSHOT buzzer?

    I just wanted to respond with the solution in case anyone else encounters this. I was able to get the Dshot buzzer to work by undating/flashing my esc's with the stand alone version of blheli. even though my dshot commands worked before with the previous CLracing f4 FC the esc's for some...
  14. K

    betaflight will not launch (it worked before)

    FYI I did an upgrade to windows 7 and got betaflight to work with the stand-alone version. Thank you again for all the help. When I have some time I'm going to look into all your suggestions with running a bootable version of Linux I can definitely see a lot of benefits to having that option
  15. K

    CLRACING F4s flight controller no longer support DSHOT buzzer?

    Hello, I just finished a FC replacement with the new CLRACING F4s. The previous version (F4) supported DSHOT buzzer enable, does the new s version no longer support this? I have all the same components esc's and motors I had before when it worked. I have enabled buzzer on aux channel and...
  16. K

    betaflight will not launch (it worked before)

    ok, I did look up a quick guide to booting Linux on a USB maybe I will look into it....I don't have a big enough flash drive but it does look easy, thank you for the suggestion.
  17. K

    betaflight will not launch (it worked before)

    well I have zero experience with Linux so I'm not too confident in my abilities. Obviously vista is crazy old so this just gives me incentive to "upgrade" it. I meant to a long time ago but it just keeps on working...this betaflight situation was the first time I ran into something I couldn't...
  18. K

    betaflight will not launch (it worked before)

    "Graphics card is a potato" haha that's hilarious. Well as far as I can tell betaflight standalone config supports windows 7, and I found a reputable company selling windows 7 for a very good price so I think I'll try installing and go from there. Thank you
  19. K

    betaflight will not launch (it worked before)

    Thank you, I tried downloading the stand alone version but I'm still running windows vista which it looks like is unsupported. So I guess I'll finally make the "upgrade" to another crappy version of windows
  20. K

    betaflight will not launch (it worked before)

    Thank you for your reply, it looks like you are right, it must be related to chrome. The funny thing is with using Vista it worked right up until a week ago....weird. I tried downloading the stand-alone version of betaflight config and it looks like it doesn't work with Vista.....so I guess I...
Top