Craig Johnson
Member
HELP PLEASE!!!
I have in my custody a brand spanken new Global Drone X183 (X6 Follower) WiFi FPV GPS drone.
I took it up for its maiden voyage this morning without any significant issues.
But when I went to fly it this afternoon, big trouble in little Edo {obscure Digimon reference here}.
The drone appears to successfully complete its prelaunch initialisation sequence, and pulling both joysticks on the radio down and outward starts all four motors in idle. But giving it throttle now does nothing! The drone stays on the ground at idle speed.
Almost immediately after power-on, all of the LEDs in the drone blink the following in unison (I believe is a fault code):
Two brief flashes, pause for ~700ms, longer flash. Cycle rep]eats until the drone is powered down.
I ensured that the flight battery was fully charged (the radio's display indicated 8.4 volts) and I power-cycled the drone multiple times -- still no joy.
Does anybody have any ideas here?
I have in my custody a brand spanken new Global Drone X183 (X6 Follower) WiFi FPV GPS drone.
I took it up for its maiden voyage this morning without any significant issues.
But when I went to fly it this afternoon, big trouble in little Edo {obscure Digimon reference here}.
The drone appears to successfully complete its prelaunch initialisation sequence, and pulling both joysticks on the radio down and outward starts all four motors in idle. But giving it throttle now does nothing! The drone stays on the ground at idle speed.
Almost immediately after power-on, all of the LEDs in the drone blink the following in unison (I believe is a fault code):
Two brief flashes, pause for ~700ms, longer flash. Cycle rep]eats until the drone is powered down.
I ensured that the flight battery was fully charged (the radio's display indicated 8.4 volts) and I power-cycled the drone multiple times -- still no joy.
Does anybody have any ideas here?
