naze32 rev6?

Okay so I gave up on the oem 3CCD fc that came with the quad. I bought a Naze32 Rev6 and im trying to figure out why when i plug it into the computer it is not seen to flash or update. Ive tried different cables and ports with no success. Any ideas? the computer doesnt see the fc. it makes a sound when it gets plugged in to the computer for the first time then plugging in after that there is no sound. The fc has a constant blue light and a somewhat slow flashing green light.

Try using a different data cable the one you are using might be a charge only cable.

Just to let u know all f1 boards a re about to be kicked. The updates are to big for the chip. So soon you will not be able to use the latest firmware you will have to stay on an old version. Grab yourself an F3 with blheli passthrough.

Did you download the drivers for your computer?

Download the drivers, if not change cable if still nothing then maybe they stopped support already for that crap board.

Naze32 is still supported up to latest release v2.0.4 but if you're using this firmware, it'll only work with the latest configurator v2.0.0

If it still doesn't work, I'd suggest going back to firmware v2.0.1